home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC Electronic Plus
/
PC Electronics Plus (Most Significant Bits)(1995).ISO
/
drun.txt
< prev
next >
Wrap
Text File
|
1993-07-30
|
1KB
|
28 lines
Please note:
~~~~~~~~~~~~
If the program does not run properly or returns the message
"Not Enough Memory", please try the following:
1. In your config.sys "REM" out the line
"DEVICE=EMM386.EXE NOEMS" or change the "NOEMS" to "RAM".
2. In your AUTOEXEC.BAT "REM" out the "SHARE.EXE"
When you "REM" out a command in the CONFIG.SYS or AUTOEXEC.BAT, you
place the word REM followed by a space in front of the command in
question. After making the changes, the computer is rebooted so the
change can take place. To get the command back, simply edit out the REM
and reboot again...now your computer is back the way it was. If you are
new to computing, it would not be a bad idea to copy your AUTOEXEC.BAT
and CONFIG.SYS to a floppy. This way you'll always have a way back!
3. Some programs want to write to the disk. This task is impossible
to do on a CD-ROM Disc. Such programs are best run from a hard
drive or a floppy drive if space permitting.
4. If problems persist, as a rule, you will find in each subdirectory,
a README, .DOC, or .TXT file. Using a viewer, such a SEE.EXE
included on this Disc, read these files. If problems still persist,
the Author of each program is your best source of information.